The company has imported CNC machining equipment, can provide users with mechanical and electrical supporting processing business
News
Tell you what should pay attention to lathe processing?
Release time:
2020-11-03
1. installation position The location of the equipment of the CNC lathe manufacturer should be far away from the vibration source, and should avoid the influence of direct sunlight and thermal radiation.
1. installation position The location of the equipment of the CNC lathe manufacturer should be far away from the vibration source, avoid the influence of direct sunlight and heat radiation, and avoid the influence of moisture and airflow. If there is a vibration source near the machine tool of the CNC lathe manufacturer, then it is necessary to set up anti-vibration grooves around the machine tool, otherwise it will directly affect the machining accuracy and stability of the machine tool, make the electronic components contact poorly, malfunction, and affect the reliability of the machine tool.
2. ambient temperature The ambient temperature of the CNC lathe manufacturer should be lower than 30 degrees, and the relative temperature should be less than 80%. Generally speaking, there is an exhaust fan or air cooler inside the numerical control electric control box to keep the working temperature of the electronic components, especially the central processing unit, constant or the temperature difference changes very little. Excessive temperature and humidity will reduce the life of the control system components and cause more failures. The increase of temperature and humidity, dust will produce adhesion in the integrated circuit board, and lead to short circuit.
3. power supply requires general numerical control lathe manufacturers to install in the machining workshop not only the environmental temperature changes greatly, the use conditions are poor, but also a variety of mechanical and electrical equipment, resulting in large fluctuations in the power grid, so the manufacturers installing numerical control lathe have strict control over the power supply voltage. The power supply voltage fluctuation must be within the allowable range and remain relatively stable, otherwise it will affect the normal operation of the CNC system.
Related News
Website
Service Hotline
Mobile:086-15061041799
Fax: 0523-89651808
E-mail:1055997979@qq.com
Address: 249 Suzhang Road, Hailing District, Taizhou City
Copyright:Taizhou Liqun CNC Machine Tool Co., Ltd Powered:www.300.cn | SEO